Detailed SharePoint Latest AUG CU 2013 Installation Guide

 Pre-requisites 

-          Ensure backup is already done to farm and databases.

          Download the Package from the MS path:  http://support.microsoft.com/kb/2825949

        Note: when you download the AUG-CU,there is a CAB file also downloads with this,Both should be in Same location to do AUG CU install.

             Step 1: Stop World Wide Web Publishing Service in all SharePoint Servers

                        

  Perform CU installation in the following orders:

                           Central Admin server
                            Application Servers
                            Web Front End Servers

Installation Steps:

             Ø  Step 2 : Double click on the “ubersrv2010-kb2825949-fullfile-x64-glb” to start the installation.

     Ø  Step 3 : Check the “Click here to accept the Microsoft Software License Terms” and hit “Continue”

                        

      Ø  Step 4 : A window will prompt and wait

                                               

                                          Extracting in progress, This take some time

                                 Determine the list to be updated:

                                  

                   Step 5 : please wait while the update is installed.

                               Please Click on Yes to reboot the server

                                                        

                             

                              Click OK to complete the installation.

     Ø  Step 6: 

NOTE: you may check in CA >system settings-> Manage Servers in this farm. You will see the status is now under  “Upgrade Block”

                          

Installation Required : The server still not yet install with the same CU that already installed in other servers.

Upgrade Blocked : The server is blocked from upgrade. Server is install with latest CU and it will remained blocked until all the SP servers in the farm are installed with the same version.

   Ø  Step 7 :  Repeat Step 1 to Step 6 in other SP Servers. (App servers then follow by WFE servers)

                     NOTE: After CU is installed to all servers and rebooted. The status would change to “Upgrade Available”

  Ø  Step 8 : Run the SharePoint 2010 Products Configuration Wizard in CA server.

            Step 9 : Click “Next” to the SharePoint Products Configuration Wizard window.

   Click “Yes” to continue 
   Click “Next to Continue   
   Configuration in progress

                        Upgrade completed, click “Finish” to end.

          Step 10 : Repeat Step 8 to Step 9 other SP Servers. (App servers then follow by WFE servers)

           Step 11: Verify on the installation.

    a.       Check SP version in central admin:

                                                               i.      CA > Under “System Settings” > Select “Manage Servers in this Farms” > Ensure the version has change to “14.0.7106.5002”

     b.      Check SP servers control panel:

                                                               i.      Control Panel > Programs and features > at left pane, click on “ View installed Updates” > Ensure “KB2825949” is in the list.

  c.       Check in SP power shell:

                                                               i.      Open the SharePoint 2010 power shell

                                                                                                          

                                                             ii.      Type the following:

1.       (get-spfarm).buildversion

2.       Ensure it shows something like 14 0 7106 5002

After Upgradation Completed,Check the Central Admin page and websites.                                    

Note:I prepared the steps for FARM,if its a Standalone,Some of the steps can SKIP.

Detailed SharePoint 2010 SP2 Installation Guide

 Follow the below Detailed steps to Install the SP2 for SharePoint 2010.

·         Pre-requisites :                          

Note: Ensure backup is already done to farm and databases.

       Step 1: Stop World Wide Web Publishing Service in all SharePoint Servers

                           

     Step 2: Perform SP2 installation in the following orders:

                                 1 – Central Admin server
                                 2 – Application Servers
                                 3 – Web Front End Servers

          Installation Steps:

·                                                             Down load Binary from the Below MS link.

             http://technet.microsoft.com/en-us/sharepoint/ff800847.aspx 

    Step 2 : Double click on the “ubersrv2010-kb2775353-fullfile-x64-glb” to start the installation.

                                    

      Step 3 : Check the “Click here to accept the Microsoft Software License Terms” and hit “Continue”

                                                                                 

      Step 4 : A window will prompt and wait

                   Extracting in progress

                 Determine the list to be updated:

                   

     Ø  Step 5 : please wait while the update is installed.

                                     

                Click OK to complete the installation.


                               

    Ø  Step 6:

                  NOTE: you may check in CA >system settings-> Manage Servers in this farm. You will see the status is now under  “Upgrade Block”


                                       

     Installation Required : The server still not yet install with the same CU that already installed in other servers.

  Upgrade Blocked : The server is blocked from upgrade. Server is install with latest Update and it will remained blocked until all the SP servers in the farm are installed with the same version.

  Ø  Step 7 :  Repeat Step 1 to Step 6 in other SP Servers. (App servers then follow by WFE servers)

                NOTE: After Sp2 is installed to all servers and rebooted. The status would change to “Upgrade Available”

                                     

   Ø  Step 8 : Run the SharePoint 2010 Products Configuration Wizard in CA server.

                                         

   Ø  Step 9 : Click “Next” to the SharePoint Products Configuration Wizard window.

                                  

                  Click “Yes” to continue
                                       
                                    

                 Click “Next to Continue

                Configuration in progress

                Upgrade completed, click “Finish” to end.

                            

    Ø  Step 10 : Repeat Step 8 to Step 9 other SP Servers. (App servers then follow by WFE servers)

    Ø  Step 10 : Verify on the installation.

a.       Check SP version in central admin:

                                                               i.      CA > Under “System Settings” > Select “Manage Servers in this Farms” > Ensure the version has change to “14.0.7015.1000”

                                                   

b.      Check SP servers control panel:

                                                              i.      Control Panel > Programs and features > at left pane, click on “ View installed Updates” > Ensure “KB2687453” is in the list.

c.       Check in SP power shell:

                                                              i.      Open the SharePoint 2010 power shell

                                                       

                                                  

  

                                                            ii.      Type the following:

1.      (get-spfarm).buildversion

2.      Ensure it shows something like 14 0 7015 1000

                                               

Once the Upgrade is Done,Please Check the SharePoint Central Admin page and rest all Web sites for functionality.

Detailed Installation Step for SQL server 2008 R2 – CU8 upgrade

Detailed Installation Step for SQL server 2008 R2 – CU8 upgrade 

 

Installation Step for SQL server 2008 R2 – CU8 upgrade

NOTE: Downtime required

 If the Servers are in Failover Clusters, please follow the below steps:

[2 active nodes and 1 passive nodes]

[Active Node A, Active Node B, Passive node C]

1.    Upgrade Node C.

2.    failover one instance from Node A to Node C . Now node C is running one instance and Node A has become passive node

3.    Upgrade the node A.

4.    failover one instance from Node B to Node A . Now node A is running one instance and Node B has become passive node

5.    Upgrade the node B.

OR,

[3 active nodes and 1 passive nodes]

[Active Node A, Active Node B, Active Node C, Passive node D]

1.    Upgrade Node D.

2.    failover one instance from Node A to Node D . Now node D is running one instance and Node A has become passive node

3.    Upgrade the node A.

4.    failover one instance from Node B to Node A . Now node A is running one instance and Node B has become passive node

5.    Upgrade the node B.

6.    failover one instance from Node C to Node B . Now node B is running one instance and Node C has become passive node

7.    Upgrade the node C.

 

 

SQL CU08 upgrade steps:

 

 Step 1 :

                    File name :  SQLServer2008R2-KB2871401-x64

                double click on the binary

                              

                Click Continue.

                                                                                     

 Step 2 : Click “Next” to proceed.

                                         

                                                                                                 

 Step 3 : Check the “I accept the license terms” and hit “Next”

                                                       

Step 4: Ensure INSTANCES are selected and hit “Next”                                                                                                                                                

 Step 5: After the checking is completed, hit “Next” to proceed.                                                                                                                                    

  Step 6: Click on “Update” to continue

             

               

                         Installation in progress:                                                                                                                          

                                                                 

                             Upgrade completed:
                                                     

                             Click Close.

   Step 7 : Server will be restarted to take effect. Press “Ok” to reboot the server.

                          Note: if server not rebooted automatically, Do manual reboot.

Step 8 : After the server is rebooted. Perform the following few verifications:

Go  SQL Management Studio > Help tab > About…

                                      Versions Should be as below : 10.50.4290.0

                                                                                   

  Check in Control Panel > Programs and features > at left pane, click on “ View installed Updates” > Ensure “KB2871401” is in the list.

                                        

                                                                                                                                                 Once the Upgrade is Done Check the SharePoint Central Admin page and rest All web sites are working.